Step 1 – SET UP THE CONFERENCE CALL
Organize your conference call by notifying all participants of the date and time for your conference call, the Conference Dial-in Number and the Guest Code.
• Toll-Free Dial-in Conference Number: see Welcome Letter
• Local Dial-in Conference Number: see Welcome Letter (for use by International callers who don’t have access to Local Dial-in numbers in their country)
• Note: Local Dial-in numbers from 23 International cities are available.
Step 2 – GET ON THE CONFERENCE CALL
At the specified time, all participants dial the Conference Dial-in Number and enter the appropriate Host Code or Guest Code.
• As Host, you have the option of managing your call using either Touch Tone commands via your telephone keypad or by logging on to the AireConference Web Portal or both.
• Note: A conference can have multiple hosts or presenters.
• See below for a summary of all Web-based commands and Tone Tone commands.
Step 3 – LOGIN TO THE WEB PORTAL
Login to the AireConference Web Portal:
1. Go to: www.aireconference.com and click Conferencing Portal at the top of the page.
2. Enter Account #: Your AireConference account number
3. Enter Password: aireconf (default)
4. Web Portal opens to the Subscribers page.
• If using the Web Portal for the first time, click on your Subscriber Name and then Update your Password.
5. Go to the Conferences page to begin management of your conference.
• Click on the Conference Number of the conference you wish to manage. This opens the Calls page for the conference.
• Set the Refresh rate to 10 seconds (recommended). You can also refresh the page manually by clicking the browser’s Refresh button.
Step 4 – MANAGE THE CONFERENCE CALL
Identify Callers
When callers join the conference; you may enter their names in order to identify callers when they are speaking:
• Click on the User Name field, type in the caller’s name and then hit “Enter”.
• The name will remain for the duration of the call and will appear in the Calls report.
Mute Callers (also Touch Tone *5)
The host has several options available to mute callers.
CONFERENCE MUTE: To mute all callers/guests, use the Conference Mute dropdown at the top of the page just to the right of the Conference Number. Conference Mute applies only to Guests (not to Hosts) and has 3 settings:
1. Open– All callers/guests can speak.
2. Relaxed -- Mutes all callers/guests but gives callers the ability to unmute/mute themselves by pressing *6 (this should be announced prior to entering Relaxed mode).
3. Strict -- Mutes all callers/guests with no ability to unmute themselves (this should be announced prior to entering Strict mode).
Note: Strict mode is also used in conjunction with the Question-and-Answer feature (see below).
INDIVIDUAL MUTE:
1. To mute an individual caller, click the Mute box for the specific caller.
2. A check mark will appear to let you know that the caller is muted.
3. To unmute the caller, click the box again.
Lock (Secure) Conference (also Touch Tone *7)
Use the Conference Lock setting at the top of the page the right of the Conference Number to prevent additional callers from joining the call once all desired participants have been identified.
1. To lock the conference click the Lock indicator. It will change from Unlocked to Locked.
2. To unlock the conference, click the Lock indicator again. It will change from Locked to Unlocked.
Hold Participants
There are two options available for placing callers on hold during a conference.
CONFERENCE HOLD: To put all callers/guests on hold, use the Conference Hold setting to the right of the Conference Number.
1. To put the conference on hold, click the Hold indicator. It will change from Off Hold to On Hold and callers will hear the on-hold music.
2. To take the conference off hold, click the Hold indicator again. It will change from On Hold to Off Hold.
3. NOTE: Conference Hold applies only to Guests (not to Hosts). All Hosts on the call can converse with each other while Guests hear the on-hold music.
INDIVIDUAL HOLD:
1. To place an individual caller on hold, click the Hold box for the specific caller.
2. A check mark will appear to let you know that the caller is on hold. The Caller will hear the on-hold music until placed back into the conference.
3. To take the caller off hold, click the box again.
Monitor Noise
Use the Noise Indicator setting at the top of the page the right of the Conference Number to enable the noise level indicator for each caller.
1. To enable this feature, click the Noise setting. It will change from Noise Indicator Off to Noise Indicator On.
2. A noise/volume meter will appear next to the Mute box for each caller.
3. With the Noise Indicator on, you can identify a noisy line and individually mute that specific caller.
Entry/Exit Tones (available via Tone Tone *2 only)
You can use the Touch Tone command (#2) to individually turn off Entry tones or Exit tones or both. (Not available as a Web-based command).
Record Conference (also Touch Tone *9)
Use the Recording setting at the top of the page the right of the Conference Number to record the conference call.
1. To begin recording, click the Recording indicator. It will change from Not Recorded to Recorded.
2. To stop recording, click the Recording indicator. It will change from Recorded to Not Recorded.
3. You can start and stop recording multiple times during a conference. However, only one recording will be produced.
Question-and-Answer Feature (used in conjunction with Touch Tone *3)
Use the following steps to conduct a host-controlled Question-and-Answer (Q&A) session:
1. To start a Q&A session, set the Conference Mute setting to Strict and then press Touch Tone *3 then 1 from your telephone keypad.
2. All callers will hear that the call has been muted. Announce that callers can ask a question by pressing *6.
3. Any caller can press *6 and then confirm that he wants to ask a question. Callers will be placed in the Q&A queue in the order they pressed *6. On the Web Portal, a Q&A icon will be displayed in the Q&A column for the caller. Note: clicking on the Q&A column header will sort callers in the order they were placed in the Q&A queue.
4. A caller can be unmuted by clicking on the Q&A icon (or by pressing Touch Tone *3 then 1) to he can ask a question or make a comment.
5. Clicking the Q&A icon a second time (or by pressing Touch Tone *3 then 2) will mute the caller and drop him from the Q&A queue.
6. Press Touch Tone *3 then 3 to clear the Q&A queue and end the Q&A session.
Disconnect Callers
As Host, you have the option of disconnecting disruptive callers, callers with bad connections or unwanted anonymous callers from the conference by clicking the red x-box at the far left of the caller’s entry on the Calls page.
Step 5 – AFTER THE CONFERENCE CALL
Reports
Go to the Reports page to view either the Conferences report or the Calls report.
1. The Conferences report shows the start time, end time, conference duration, total number of callers and total combined call duration for each conference completed for the requested time period.
Note: Clicking on the Conference Number displays a Gantt Chart showing the call duration for each caller in the conference.
2. The Calls report shows the caller information and statistics for each call completed for the requested time period.
Recording Playback & Download
Go to the Reports page to view the Conferences report.
1. Conferences that were recorded will have a Recording icon next to it.
2. Clicking the icon will download the recording for playback or storage to the customer’s computer.
3. If desired, you can e-mail a copy of the recording to conference call participants (rather than having participants call in to playback the recording via telephone).
Telephone Playback
Conference recordings are available to Guests via telephone. You will need to provide the Playback dial-in number, the Guest Code (same as the original conference call) and the following instructions:
1. Call the Playback dial-in number:
• Toll-Free Playback Dial-in Number: see Welcome Letter
• Local Playback Dial-in Number: see Welcome Letter (for use by International callers)
• Note: Local dial-in numbers from International locations for playback purposes are not available)
2. Enter the same Guest Code as the original conference call.
3. If multiple recordings are available, enter the number for the desired recording.
Note: The last 5 recorded conferences will be available for playback. Recordings will be available for up to one month.
4. During the playback, the caller can scroll forward or backward through the recorded conference. The playback feature commands are:
• *1 – Rewind 30 seconds
• *2 – Fast forward 30 seconds
• *5 – Pause/Resume playback